Home (EN)
  • Youtube
    • Products
      • Finnfoam
        • Panel dimensions and types
          • Flat edge
          • Rabbet
          • Tongue and groove
          • Planed and grooved (HU) for sandwich panel structures
          • Basement wall
          • Ventilated foundation
          • Wall and ceiling insulation for timber-framed buildings
          • Grooved panel (URA)
          • Foundation mold
          • Pillar mold
          • Pipe enclosure
          • INFRA panels
          • Edge-reinforced slab
        • Composition and structure
        • CE marking (DoP)
          • Archive
            • DoP - 2018
            • DoP - 2017
            • DoP - 2016
            • DoP - 2015
            • DoP - 2014
            • DoP - 2013
        • Fire safety
        • Product storage
        • Properties
          • Strength
            • Finnfoam Oy's XPS panels’ strength development
          • Moisture properties
          • Thermal insulation capacity
          • Other properties
      • FF-PIR
        • FF-PIR, aluminum surface
          • Sauna
          • ALK tongue and groove
          • ALI flat edge
          • ALS renovation panel
          • K600 between studs
          • K900 between studs
        • FF-PIR, plastic surface
          • PLK tongue and groove
          • PLI flat edge
        • FF-PIR, FR flame proof surface
          • FF-PIR, FR flame proof surface
        • FF-PIR, gypsum surface
          • GYL rabbet
        • CE marking (DoP)
        • Properties
        • Product storage
      • FF-EPS
        • EPS panels
          • FF-EPS 100
          • FF-EPS 100S
          • FF-EPS 60S
          • FF-EPS X 60S
          • FF-EPS ETICS
          • FF-EPS 60S X SILENT
        • CE marking (DoP)
          • Archive
            • DoP - 2016
            • DoP - 2015
        • Technical specifications
        • Product storage
      • Tulppa
        • CE marking (DoP)
          • Archive
            • DoP - 2016
            • DoP - 2015
            • DoP - 2014
            • DoP - 2013
        • Technical specifications
        • Product storage
      • FF-SIGNAL
        • Installation
        • Installation examples
        • FF-SIGNAL structural schematics
        • Product storage
      • FF-FLOOR
        • BULLETIN
      • Product storage
    • Applications
      • Frost insulation
        • Foundation mold
        • Edge-reinforced slab
      • Basement wall
      • Foundations
        • Slab-on-ground floor
        • Ventilated base floor
      • Walls
        • Thermal insulation for exterior walls using FF-PIR polyurethane insulation products
        • Thermal insulation for exterior walls using FF-EPS
        • Thermal insulation for exterior walls using Finnfoam
        • Finnfoam and FF-PIR insulation as vapor barrier
      • Intermediate floor
      • Roof
        • Inverted roof
        • Thermal insulation for roofs and ceilings using FF-PIR polyurethane insulation products
        • Thermal insulation for roofs and ceilings using FF-EPS
        • Finnfoam and FF-PIR insulation as vapor barrier
      • Insulating the ceiling and walls of an older attic
      • Supplementary thermal insulation
        • Supplementary thermal insulation for walls
        • FF-PIR for renovation and supplementary thermal insulation of ceilings and walls
      • Roads and yard areas
        • Finnfoam INFRA panel
      • Pipe trenches
      • Sauna
    • Finnfoam group
      • Vision, strategy and values
      • sustainability
        • Environment
        • Carbon footprint
        • BREEAM
        • Quality
        • Safety
    • Contact
    • LinkedIn
    • Facebook
    • Youtube
    1. Home
    2. Products
    3. FF-EPS
    4. EPS panels
    5. FF-EPS ETICS
    • Finnfoam
    • FF-PIR
    • FF-EPS
      • EPS panels
        • FF-EPS 100
        • FF-EPS 100S
        • FF-EPS 60S
        • FF-EPS X 60S
        • FF-EPS ETICS
        • FF-EPS 60S X SILENT
      • CE marking (DoP)
      • Technical specifications
      • Product storage
    • Tulppa
    • FF-SIGNAL
    • FF-FLOOR
    • Product storage

    FF-EPS ETICS

    FF-EPS-100S.jpg

    FF-EPS ETICS was designed to be us as a foundation for render. The panels are aged at the plant and provide an optimal base for a rendering coat. The FF-EPS ETICS products have been tested for compatibility and weathering with the products of Alsecco and STO, among others, by Tampere University of Technology (TTY). The material used for the gray FF-EPS contains graphite, and its thermal conductivity is λDeclared 0.031 W/mK, which is significantly higher than that of the traditional white EPS.

    The panels have a tongue and groove profile on all sides, and they are available in thicknesses ranging from 100 to 400 mm, of which 100, 180, and 250 mm options are available off the shelf. The size of the panels is 600 x 1,200 mm, which significantly facilitates handling and installation. The short-term compressive strength of FF-EPS ETICS panels is 60 kPa. Due to the fire retardant used in the FF-EPS ETICS products, their fire class is E.

    Home (EN)

    FINNFOAM OY
    Satamakatu 5
    24100 Salo, Finland
    Tel +358 2 777 300