FF-EPS X 60 S
The FF-EPS M panels have a diamond-shaped grid pattern on one side. The grooves are intended to function as a network of ventilation channels in flat roofs, for example, or to allow for better adhesion of concrete when cast directly on to the panel. The material used for the gray FF-EPS contains graphite, and its thermal conductivity is λDeclared 0.031 W/mK, which is significantly higher than that of the traditional white EPS. FF-EPS X 60 kPa is well-suited for use as thermal insulation in walls and ceilings. The panels have a tongue and groove profile on all sides, and they are available in thicknesses ranging from 100 to 400 mm. The locking tongue and groove ensures that a single layer of panels will provide insulation without thermal bridging. The size of the panels is 600 x 1,200 mm, which significantly facilitates handling and installation. The short-term compressive strength of FF-EPS X 60S panels is 60 kPa. Due to the fire retardant used in the FF-EPS X 60S products, their fire class is E.