FF-EPS 60S X SILENT

Finnfoam's NEW FF-EPS 60S X SILENT panels have a 15–20 mm thick layer of the special SILENT coating on one side. The SILENT coating has excellent soundproofing and fire performance, and it may be used to provide a foundation for cladding. BROOF(t2) testing has been conducted on the panels with both PVC and bitumen cladding. The SILENT coating consists of lightweight, nearly incombustible Light Concrete Foam, which provides a sturdy, non-compressive foundation for cladding materials. The FF-EPS 60S X SILENT have a deep 10 mm grid pattern below the coating, which is intended to function as a network of ventilation channels on low pitch roofs. FF-EPS 60S X SILENT reduces the cubic amount of material lifted on to the roof and allows for faster installation. The required U value of 0.09 can be provided with a single 320 mm thick panel, which allows for faster roof construction.

The material used for the gray FF-EPS contains graphite, and its thermal conductivity is λDeclared 0.031 W/mK, which is significantly higher than that of the traditional white EPS. FF-EPS 60S X SILENT was designed specifically for use as thermal insulation for low pitch roofs, but it can also be used in walls. The panels have a locking tongue and groove profile on all sides, which makes it possible to provide leak-proof paneling without thermal bridging using a single layer of panels. The panel size is 600 x 1,200 mm and they are available in thicknesses ranging from 100 to 400 mm. The compact size makes handling and installation significantly easier. The short-term compressive strength of FF-EPS 60S X SILENT panels is 60 kPa. Due to the fire retardant used in the FF-EPS 60S X thermal insulation products, their fire class is E.