Home (EN)
  • Youtube
    • Products
      • Finnfoam
        • Panel dimensions and types
          • Flat edge
          • Rabbet
          • Tongue and groove
          • Planed and grooved (HU) for sandwich panel structures
          • Basement wall
          • Ventilated foundation
          • Wall and ceiling insulation for timber-framed buildings
          • Grooved panel (URA)
          • Foundation mold
          • Pillar mold
          • Pipe enclosure
          • INFRA panels
          • Edge-reinforced slab
        • Composition and structure
        • CE marking (DoP)
          • Archive
            • DoP - 2018
            • DoP - 2017
            • DoP - 2016
            • DoP - 2015
            • DoP - 2014
            • DoP - 2013
        • Fire safety
        • Product storage
        • Properties
          • Strength
            • Finnfoam Oy's XPS panels’ strength development
          • Moisture properties
          • Thermal insulation capacity
          • Other properties
      • FF-PIR
        • FF-PIR, aluminum surface
          • Sauna
          • ALK tongue and groove
          • ALI flat edge
          • ALS renovation panel
          • K600 between studs
          • K900 between studs
        • FF-PIR, plastic surface
          • PLK tongue and groove
          • PLI flat edge
        • FF-PIR, FR flame proof surface
          • FF-PIR, FR flame proof surface
        • FF-PIR, gypsum surface
          • GYL rabbet
        • CE marking (DoP)
        • Properties
        • Product storage
      • FF-EPS
        • EPS panels
          • FF-EPS 100
          • FF-EPS 100S
          • FF-EPS 60S
          • FF-EPS X 60S
          • FF-EPS ETICS
          • FF-EPS 60S X SILENT
        • CE marking (DoP)
          • Archive
            • DoP - 2016
            • DoP - 2015
        • Technical specifications
        • Product storage
      • Tulppa
        • CE marking (DoP)
          • Archive
            • DoP - 2016
            • DoP - 2015
            • DoP - 2014
            • DoP - 2013
        • Technical specifications
        • Product storage
      • FF-SIGNAL
        • Installation
        • Installation examples
        • FF-SIGNAL structural schematics
        • Product storage
      • FF-FLOOR
        • BULLETIN
      • Product storage
    • Applications
      • Frost insulation
        • Foundation mold
        • Edge-reinforced slab
      • Basement wall
      • Foundations
        • Slab-on-ground floor
        • Ventilated base floor
      • Walls
        • Thermal insulation for exterior walls using FF-PIR polyurethane insulation products
        • Thermal insulation for exterior walls using FF-EPS
        • Thermal insulation for exterior walls using Finnfoam
        • Finnfoam and FF-PIR insulation as vapor barrier
      • Intermediate floor
      • Roof
        • Inverted roof
        • Thermal insulation for roofs and ceilings using FF-PIR polyurethane insulation products
        • Thermal insulation for roofs and ceilings using FF-EPS
        • Finnfoam and FF-PIR insulation as vapor barrier
      • Insulating the ceiling and walls of an older attic
      • Supplementary thermal insulation
        • Supplementary thermal insulation for walls
        • FF-PIR for renovation and supplementary thermal insulation of ceilings and walls
      • Roads and yard areas
        • Finnfoam INFRA panel
      • Pipe trenches
      • Sauna
    • Finnfoam group
      • Vision, strategy and values
      • sustainability
        • Environment
        • Carbon footprint
        • BREEAM
        • Quality
        • Safety
    • Contact
    • LinkedIn
    • Facebook
    • Youtube
    1. Home
    2. Products
    3. FF-PIR
    4. FF-PIR, aluminum surface
    5. ALI flat edge
    • Finnfoam
    • FF-PIR
      • FF-PIR, aluminum surface
        • Sauna
        • ALK tongue and groove
        • ALI flat edge
        • ALS renovation panel
        • K600 between studs
        • K900 between studs
      • FF-PIR, plastic surface
      • FF-PIR, FR flame proof surface
      • FF-PIR, gypsum surface
      • CE marking (DoP)
      • Properties
      • Product storage
    • FF-EPS
    • Tulppa
    • FF-SIGNAL
    • FF-FLOOR
    • Product storage

    FF-PIR ALI insulation panels with flat edge on all sides

    ff-ali-group.jpgThe FF-PIR ALI insulation panels are suitable for all thermal insulation applications in construction. The panels are suited for use in both renovation and new construction. In renovation use, the panels can be used for interior supplementary thermal insulation. For new construction, the panels can be used as thermal insulation for the ceiling, walls, split footings or in the sauna. In addition, the panels can also be used as thermal insulation panels for windows, doors, and ventilators. The declared thermal conductivity λD of the panels is 0.022 W/mK, which means that the best possible insulation capacity can be provided for a structure using thin insulation panels. The panel is covered with a diffusion-proof aluminum laminate surface on both sides. The fire class of the insulating foam component of FF-PIR insulation is D-s1, d0.

    Product Size Units/package Packages/pallet
    FF-PIR 50 ALI 50 x 600 x 2400 mm 8 6
    FF-PIR 100 ALI 100 x 600 x 2400 mm 4 6
    FF-PIR 150 ALI 150 x 600 x 2400 mm 2 8

     

    Declared thermal conductivity λD: 0.022 W/mK

    Method of fitting: Flat edge

    Coating: Diffusion-proof aluminum laminate


    Home (EN)

    FINNFOAM OY
    Satamakatu 5
    24100 Salo, Finland
    Tel +358 2 777 300