FF-PIR ALK insulation panels with tongue and groove on all sides
The FF-PIR ALK insulation panels are suitable for all thermal insulation applications in construction. The panels are suited for use in both renovation and new construction. In renovation use, the panels can be used for interior supplementary thermal insulation. For new construction, the panels can be used as thermal insulation for the ceiling, walls, split footings or in the sauna. The declared thermal conductivity λD of the panels is 0.022 W/mK, which means that the best possible insulation capacity for a structure can be ensured using thin insulation panels. The panel is covered with a diffusion-proof aluminum laminate surface on both sides. The panels also function as vapor barrier within the structure, which means that the installation of a separate vapor barrier layer is not required. If the entire structure is built using FF-PIR insulation, a separate wind-protective layer on the outside of the structure is also unnecessary. The fire class of the insulating foam component of FF-PIR insulation is D-s1, d0. The FF-PIR insulation panels are produced in widths ranging from 20 to 240 mm at 10 mm intervals, most of which are readily in stock. The size of the panels is 600 x 2,400 mm, which allows for easy transportation and relocation in narrow spaces. The panels can also be installed horizontally in relation to the frame studs.
Product |
Size |
Units/package |
Packages/pallet |
FF-PIR 30 ALK |
30 x 600 x 2400 mm |
10 |
8 |
FF-PIR 40 ALK |
40 x 600 x 2400 mm |
10 |
6 |
FF-PIR 50 ALK |
50 x 600 x 2400 mm |
8 |
6 |
FF-PIR 70 ALK |
70 x 600 x 2400 mm |
6 |
6 |
FF-PIR 80 ALK |
80 x 600 x 2400 mm |
5 |
6 |
FF-PIR 100 ALK |
100 x 600 x 2400 mm |
4 |
6 |
FF-PIR 120 ALK |
120 x 600 x 2400 mm |
3 |
6 |
FF-PIR 130 ALK |
130 x 600 x 2400 mm |
3 |
6 |
FF-PIR 150 ALK |
150 x 600 x 2400 mm |
2 |
8 |
FF-PIR 160 ALK |
160 x 600 x 2400 mm |
2 |
8 |
FF-PIR 200 ALK |
200 x 600 x 2400 mm |
2 |
6 |
FF-PIR 240 ALK |
240 x 600 x 2400 mm |
2 |
6 |
For manufacturing products with special sizing or product thickness/method of fitting not listed in the price catalog, the minimum amount is 30 m3. All products are available with a flat edge, rabbet or tongue and groove profile. The deliverable amount of any of these FF-PIR special products may vary +0–30 m2 in relation to the ordered amount.
Declared thermal conductivity λD: 0.022–0.023 W/mK
Method of fitting: Tongue and groove on all sides
Coating: Diffusion-proof aluminum laminate