Home (EN)
  • Youtube
    • Products
      • Finnfoam
        • Panel dimensions and types
          • Flat edge
          • Rabbet
          • Tongue and groove
          • Planed and grooved (HU) for sandwich panel structures
          • Basement wall
          • Ventilated foundation
          • Wall and ceiling insulation for timber-framed buildings
          • Grooved panel (URA)
          • Foundation mold
          • Pillar mold
          • Pipe enclosure
          • INFRA panels
          • Edge-reinforced slab
        • Composition and structure
        • CE marking (DoP)
          • Archive
            • DoP - 2018
            • DoP - 2017
            • DoP - 2016
            • DoP - 2015
            • DoP - 2014
            • DoP - 2013
        • Fire safety
        • Product storage
        • Properties
          • Strength
            • Finnfoam Oy's XPS panels’ strength development
          • Moisture properties
          • Thermal insulation capacity
          • Other properties
      • FF-PIR
        • FF-PIR, aluminum surface
          • Sauna
          • ALK tongue and groove
          • ALI flat edge
          • ALS renovation panel
          • K600 between studs
          • K900 between studs
        • FF-PIR, plastic surface
          • PLK tongue and groove
          • PLI flat edge
        • FF-PIR, FR flame proof surface
          • FF-PIR, FR flame proof surface
        • FF-PIR, gypsum surface
          • GYL rabbet
        • CE marking (DoP)
        • Properties
        • Product storage
      • FF-EPS
        • EPS panels
          • FF-EPS 100
          • FF-EPS 100S
          • FF-EPS 60S
          • FF-EPS X 60S
          • FF-EPS ETICS
          • FF-EPS 60S X SILENT
        • CE marking (DoP)
          • Archive
            • DoP - 2016
            • DoP - 2015
        • Technical specifications
        • Product storage
      • Tulppa
        • CE marking (DoP)
          • Archive
            • DoP - 2016
            • DoP - 2015
            • DoP - 2014
            • DoP - 2013
        • Technical specifications
        • Product storage
      • FF-SIGNAL
        • Installation
        • Installation examples
        • FF-SIGNAL structural schematics
        • Product storage
      • FF-FLOOR
        • BULLETIN
      • Product storage
    • Applications
      • Frost insulation
        • Foundation mold
        • Edge-reinforced slab
      • Basement wall
      • Foundations
        • Slab-on-ground floor
        • Ventilated base floor
      • Walls
        • Thermal insulation for exterior walls using FF-PIR polyurethane insulation products
        • Thermal insulation for exterior walls using FF-EPS
        • Thermal insulation for exterior walls using Finnfoam
        • Finnfoam and FF-PIR insulation as vapor barrier
      • Intermediate floor
      • Roof
        • Inverted roof
        • Thermal insulation for roofs and ceilings using FF-PIR polyurethane insulation products
        • Thermal insulation for roofs and ceilings using FF-EPS
        • Finnfoam and FF-PIR insulation as vapor barrier
      • Insulating the ceiling and walls of an older attic
      • Supplementary thermal insulation
        • Supplementary thermal insulation for walls
        • FF-PIR for renovation and supplementary thermal insulation of ceilings and walls
      • Roads and yard areas
        • Finnfoam INFRA panel
      • Pipe trenches
      • Sauna
    • Finnfoam group
      • Vision, strategy and values
      • sustainability
        • Environment
        • Carbon footprint
        • BREEAM
        • Quality
        • Safety
    • Contact
    • LinkedIn
    • Facebook
    • Youtube
    1. Home
    2. Products
    3. FF-PIR
    4. FF-PIR, plastic surface
    5. PLI flat edge
    • Finnfoam
    • FF-PIR
      • FF-PIR, aluminum surface
      • FF-PIR, plastic surface
        • PLK tongue and groove
        • PLI flat edge
      • FF-PIR, FR flame proof surface
      • FF-PIR, gypsum surface
      • CE marking (DoP)
      • Properties
      • Product storage
    • FF-EPS
    • Tulppa
    • FF-SIGNAL
    • FF-FLOOR
    • Product storage

    FF-PIR_PLI_150_persp_lte.jpgFF-PIR PLI

    The FF-PIR PLI insulation panels are suitable for all thermal insulation applications in construction. The panels are suited for use in both renovation and new construction. In renovation use, the panels can be used for interior supplementary thermal insulation. For new construction, the panels can be used as thermal insulation for the ceiling, walls, and split footings. The declared thermal conductivity λD of the panels is 0.022 W/mK, which means that the best possible insulation capacity for a structure can be provided using thin insulation panels. The panels are coated with a diffusion-proof plastic laminate on both sides, which does not contain metal. The panel was designed specifically for the concrete industry, but it can also be used in other types of construction. The panels also function as vapor barrier within the structure, which means that the installation of a separate vapor barrier layer is not required. If the entire structure is built using FF-PIR insulation, a separate wind-protective layer on the outside of the structure is also unnecessary. The fire class of the insulating foam component of FF-PIR insulation is D-s1, d0.

    The FF-PIR insulation panels are produced in widths ranging from 30 to 240 mm at 10 mm intervals. The size of the panels is 600 x 2,400 mm, which allows for easy transportation and relocation in narrow spaces. The panels can also be installed horizontally in relation to the frame studs.PLI-3d.jpg

     

    Product Size Units/package Packages/pallet
    FF-PIR 50 PLI 50 x 600 x 2400 mm 8 6
    FF-PIR 100 PLI 100 x 600 x 2400 mm 4 6
    FF-PIR 150 PLI 150 x 600 x 2400 mm 2 8

     

    Declared thermal conductivity λD: 0.022 W/mK

    Method of fitting: Flat edge

    Coating: Diffusion-proof plastic sheet laminate

    Home (EN)

    FINNFOAM OY
    Satamakatu 5
    24100 Salo, Finland
    Tel +358 2 777 300