- Home
- Products
- FF-PIR
- FF-PIR, plastic surface
- PLK tongue and groove
FF-PIR PLK

The FF-PIR PLK insulation panels are suitable for all thermal insulation applications in construction. The panels are suited for use in both renovation and new construction. In renovation use, the panels can be used for interior supplementary thermal insulation. For new construction, the panels can be used as thermal insulation for the ceiling, walls, and split footings. The declared thermal conductivity λD of the panels is 0.022 W/mK, which means that the best possible insulation capacity for a structure can be provided using thin insulation panels. The panels are coated with a diffusion-proof plastic laminate on both sides, which does not contain metal. The panel was designed specifically for the concrete industry, but it can also be used in other types of construction. The panels also function as vapor barrier within the structure, which means that the installation of a separate vapor barrier layer is not required. If the entire structure is built using FF-PIR insulation, a separate wind-protective layer on the outside of the structure is also unnecessary. The fire class of the insulating foam component of FF-PIR insulation is D-s1, d0.
The FF-PIR insulation panels are produced in widths ranging from 30 to 240 mm at 10 mm intervals. The size of the panels is 600 x 2,400 mm, which allows for easy transportation and relocation in narrow spaces. The panels can also be installed horizontally in relation to the frame studs.
Product | Size | Units/package | Packages/pallet | |
FF-PIR 40 PLK | 600 x 2400 mm | tongue and groove (plastic surface) | 10 | 6 |
FF-PIR 50 PLK | 600 x 2400 mm | tongue and groove (plastic surface) | 8 | 6 |
FF-PIR 70 PLK | 600 x 2400 mm | tongue and groove (plastic surface) | 6 | 6 |
FF-PIR 100 PLK | 600 x 2400 mm | tongue and groove (plastic surface) | 4 | 6 |
FF-PIR 120 PLK | 600 x 2400 mm | tongue and groove (plastic surface) | 3 | 6 |
FF-PIR 150 PLK | 600 x 2400 mm | tongue and groove (plastic surface) | 2 | 8 |
FF-PIR 160 PLK | 600 x 2400 mm | tongue and groove (plastic surface) | 2 | 8 |
FF-PIR 200 PLK | 600 x 2400 mm | tongue and groove (plastic surface) | 2 | 6 |
FF-PIR 240 PLK | 600 x 2400 mm | tongue and groove (plastic surface) | 2 | 6 |
For manufacturing products with special sizing or product thickness/method of fitting not listed in the price catalog, the minimum amount is 30 m3. All products are available with a flat edge, rabbet or tongue and groove profile. The deliverable amount of any of these FF-PIR special products may vary +0–30 m2 in relation to the ordered amount.