Home (EN)
  • Youtube
    • Products
      • Finnfoam
        • Panel dimensions and types
          • Flat edge
          • Rabbet
          • Tongue and groove
          • Planed and grooved (HU) for sandwich panel structures
          • Basement wall
          • Ventilated foundation
          • Wall and ceiling insulation for timber-framed buildings
          • Grooved panel (URA)
          • Foundation mold
          • Pillar mold
          • Pipe enclosure
          • INFRA panels
          • Edge-reinforced slab
        • Composition and structure
        • CE marking (DoP)
          • Archive
            • DoP - 2018
            • DoP - 2017
            • DoP - 2016
            • DoP - 2015
            • DoP - 2014
            • DoP - 2013
        • Fire safety
        • Product storage
        • Properties
          • Strength
            • Finnfoam Oy's XPS panels’ strength development
          • Moisture properties
          • Thermal insulation capacity
          • Other properties
      • FF-PIR
        • FF-PIR, aluminum surface
          • Sauna
          • ALK tongue and groove
          • ALI flat edge
          • ALS renovation panel
          • K600 between studs
          • K900 between studs
        • FF-PIR, plastic surface
          • PLK tongue and groove
          • PLI flat edge
        • FF-PIR, FR flame proof surface
          • FF-PIR, FR flame proof surface
        • FF-PIR, gypsum surface
          • GYL rabbet
        • CE marking (DoP)
        • Properties
        • Product storage
      • FF-EPS
        • EPS panels
          • FF-EPS 100
          • FF-EPS 100S
          • FF-EPS 60S
          • FF-EPS X 60S
          • FF-EPS ETICS
          • FF-EPS 60S X SILENT
        • CE marking (DoP)
          • Archive
            • DoP - 2016
            • DoP - 2015
        • Technical specifications
        • Product storage
      • Tulppa
        • CE marking (DoP)
          • Archive
            • DoP - 2016
            • DoP - 2015
            • DoP - 2014
            • DoP - 2013
        • Technical specifications
        • Product storage
      • FF-SIGNAL
        • Installation
        • Installation examples
        • FF-SIGNAL structural schematics
        • Product storage
      • FF-FLOOR
        • BULLETIN
      • Product storage
    • Applications
      • Frost insulation
        • Foundation mold
        • Edge-reinforced slab
      • Basement wall
      • Foundations
        • Slab-on-ground floor
        • Ventilated base floor
      • Walls
        • Thermal insulation for exterior walls using FF-PIR polyurethane insulation products
        • Thermal insulation for exterior walls using FF-EPS
        • Thermal insulation for exterior walls using Finnfoam
        • Finnfoam and FF-PIR insulation as vapor barrier
      • Intermediate floor
      • Roof
        • Inverted roof
        • Thermal insulation for roofs and ceilings using FF-PIR polyurethane insulation products
        • Thermal insulation for roofs and ceilings using FF-EPS
        • Finnfoam and FF-PIR insulation as vapor barrier
      • Insulating the ceiling and walls of an older attic
      • Supplementary thermal insulation
        • Supplementary thermal insulation for walls
        • FF-PIR for renovation and supplementary thermal insulation of ceilings and walls
      • Roads and yard areas
        • Finnfoam INFRA panel
      • Pipe trenches
      • Sauna
    • Finnfoam group
      • Vision, strategy and values
      • sustainability
        • Environment
        • Carbon footprint
        • BREEAM
        • Quality
        • Safety
    • Contact
    • LinkedIn
    • Facebook
    • Youtube
    1. Home
    2. Products
    3. Finnfoam
    4. Panel dimensions and types
    5. Pipe enclosure
    • Finnfoam
      • Panel dimensions and types
        • Flat edge
        • Rabbet
        • Tongue and groove
        • Planed and grooved (HU) for sandwich panel structures
        • Basement wall
        • Ventilated foundation
        • Wall and ceiling insulation for timber-framed buildings
        • Grooved panel (URA)
        • Foundation mold
        • Pillar mold
        • Pipe enclosure
        • INFRA panels
        • Edge-reinforced slab
      • Composition and structure
      • CE marking (DoP)
      • Fire safety
      • Product storage
      • Properties
    • FF-PIR
    • FF-EPS
    • Tulppa
    • FF-SIGNAL
    • FF-FLOOR
    • Product storage

    Finnfoam Pipe enclosure

    Pipe enclosures are delivered to construction sites as panels, which can be used to construct the enclosures quickly and easily, as the panels do not have to be cut, and the walls of the enclosure will stay firmly in their place. Installing sewer and water pipelines side by side within a pipe enclosure creates a heat exchange, which makes it possible to reduce the planting depth up to 50%. The enclosures are filled with a sand cushion, which also increases the storage mass within the enclosure.

    The two smallest pipe enclosures (130 x 160 mm and 210 x 220 mm) are made from 70 mm thick Finnfoam. The 500 x 285 mm enclosure is usually made using 50 mm thick Finnfoam, but it can also be made from a 70 mm thick panel on order. The largest pipe enclosure (1,000 x 585 mm) is made using 100-mm panel.

    Material: Extruded polystyrene

    Color: Light yellow

    Technical specifications:

    Panel Size (internal dimension) width x length x panel thickness
    Finnfoam Pipe enclosure 160 x 130 x 70 mm
    Finnfoam Pipe enclosure 220 x 210 x 70 mm
    Finnfoam Pipe enclosure 500 x 285 x 50 mm
    Finnfoam Pipe enclosure 1000 x 585 x 100 mm

     

    Finnfoam Pipe enclosure 130 x 160 mm (internal dimensions of the enclosure)

    (110 mm sewer + 40 mm water pipeline)

    3b8a2db8c6f663320add358f5c4d1b79_f6036.jpg

    Finnfoam Pipe enclosure 210 x 220 mm (internal dimensions of the enclosure)

    (160 mm sewer + water pipeline)

    FF-Putkikotelo_220x210_003.png

    Finnfoam Pipe enclosure 500 x 285 mm (internal dimensions of the enclosure)

    FF-Putkikotelo_500x285.png

    Finnfoam Pipe enclosure 1,000 x 585 mm (internal dimensions of the enclosure)

    kaavio04.jpg


    Applications:

    • Pipe trenches

    Home (EN)

    FINNFOAM OY
    Satamakatu 5
    24100 Salo, Finland
    Tel +358 2 777 300